I have had many years of enjoyable trialling in my Yellow Beetle since I bought it back in 1990. It’s been developed into a very capable Classic Trials car, but in recent years I found it lacking in two respects.
When I changed to a 1300 so I could compete in class 4 to reduce the number of re-starts I managed to obtain the ex-Robert Clough Triple winning engine. This is a great motor for classics, but is far to “peaky” for the local PCT’s,.
The family bought me a Nova for Christmas and I had fun in that until Murray arranged for me to passenger Dudley Sterry which decided me I wanted an open car. A Troll was my first choice and I had my eye on David Aldersons car before David Thompson snapped it up.
Then, on this years Clee Hills I suddenly decided to get a Dellow. Not an original spec car, an 1172 side valve and 3 speed box wasn’t appealing, No, I wanted a class 8 cross-flow car.
It was remarkably easy to find one. An e-mail enquiry to The Dellow register put in me in touch with Jim Harvey who told me there were two cars available that fitted my spec. One was in the West Country in good nick, the other in Yorkshire and a bit tatty. They were both the same price! Further questioning revealed that the good one had worn three registration numbers in its career and it didn’t have a chassis number. The tatty one had a complete provenance and that was the one that ended up in my garage.
It’s a Mk1 which means no doors, a high bonnet line at the front and that glorious outside fiddle brake. It left the factory on 8th December 1950 for The Regal garage in West Croydon who had it on their books until 2nd May 1951 when it was bought by a Mr Herbert Wilson. He sold it three years later and it went though a succession of owners until it ended up disused in a barn near Chichester.
It came to light again during a house clearance and was acquired by Porsche enthusiast Peter Wilson who had it converted to its present spec by his local agricultural engineer.
The conversion is functional rather than elegant. The Escort axle has a much wider track than the original so the wheels stick out. Most conversions use the narrower axle from a 105E. The other very noticeable thing is that the air filter sticks out of the bonnet which rather offends the purists.
Frankly a lot of the engineering on the conversion was not done very well and as the body has never been restored it is not a pretty car. That is part of its charm. It goes and I can use it but there is plenty of scope for me to exercise my mechanical skills.
In the time I have owned it I have completely stripped and rebuilt the brakes, introducing me to the joys of making brake pipes. Fifty years of grime and rust have been cleaned from half of the chassis and new paint applied. I have also done quite a bit of re-wiring and got some of the instruments to work.
It has had five competitive outings, two PCT’s, the March Hare and two autotests. I have discovered that under high bonnet temperature can cause it to refuse to start when hot, so I have fitted a decent electric fan which seems to solve the problem.
So I am certainly enjoying my Dellow but it will be a while before it ventures to far from home. First because it needs a lot more work before it can be trusted mechanically. The second is that I have to find a way to fit my lanky 6ft frame into it properly!
Following “Me and My Dellow” I had an interesting email from Nigel Brown which he has given me to publish here:-
Michael,
Very pleased to see you have joined the Dellow brigade. I ran my Mark 1 in various forms over the 17 years that I trialled it.
 | Gutless E93A on original SU’s. |
| E93A plus Shorrocks. |
| 100E plus Willment OHIV on SU’s |
| 100E plus OHIV plus Shorrocks |
| and finally 1500 pre cross-flow Ford on SU’s. |
Sold ECL 787 in ”87 as I had got the Allard Special well sorted by then and I needed the money to help restore our C16th ruin of a cottage! I still have the (basket-case) Lightweight Dellow (and the above OHIV engine) that Tony Marsh built for speed events. Terrific photo of it on the grid at ’54 Silverstone over on the Dellow Register website.
Even with the well tuned 1500 my Dellow never ran hot on its original radiator. Yours looks to have been fitted with a very much smaller modern rad.
Terminology. Dellow’s don’t have “fiddle brakes”. NTF cars do – to operate either back wheel, Dellows never did. The outside handbrake on mine (when on original cables) operated front brakes when pushed forward and vice versa.
Wide axle. When Peter Le Couteur and I set about putting a “modern” axle in our Dellows we discussed and arrived at the following. 105E axle. In standard form the pinion flange is in fact offset to one side. By cutting opposite side casing only (around 2″ from memory) we brought axle width down and centralised pinion. We had just one halfshaft to respline, recut along shaft (using originals to register cutter) and then finally took the approx. 2″ off the end. This, with 4-to-5 stud adaptor plates we made, gave us exactly the same width rear track as the original axle.
If you have any queries and think I may be able to help, please don’t hesitate to email or phone me. You deserve a medal for the website, it is informative and unfailingly interesting. It is now the only way that I keep in touch with the sport.
Good luck with the Dellow.
Regards
Nigel Brown
We have been publishing stuff about Classic Trials on the Web since 1995 and always appreciate feedback. Comments, Corrections, Criticism & Concerns are all welcome. You can leave a comment to have your say here on this web site or our Social Media
Classical Gas 